Fix It and Make a Difference
In 2005, I was working in the central engineering group for Armstrong in Lancaster PA. One day, while I was sitting in my cubicle, the CEO of our division came up to me and told me that he needed my help at our newly acquired cabinet plant in Auburn Nebraska. I asked him what help I could provide. He looked at me and said, “Fix it – you’ll know what I mean when you get there.” I was told I would have a small team travelling with me and our first visit to the plant would be for 2 weeks. During that time, we were to evaluate the things we could improve, make quick improvements, and develop plans for future efforts.
I have been to hundreds of factories in my career, and have seen some well-run factories and some poorly run ones. When we arrived, I saw what was clearly the poorest run facility in my experience. There was no organization or order. Equipment was in disrepair. People looked like they had been beaten down. Many had evidence of prior injuries. It was hard to find a safe walkway in the entire plant. It made me immediately angry that people had to work in these conditions. In fact, one of my team members was so angry, we had to take him outside to calm him down.
“What the hell are they thinking?” he asked, “How can they get away with this?” We talked for a while and eventually came to the conclusion that we couldn’t fix the past, but we could damn sure improve the future for these folks. Luckily, the company had hired a new plant manager, who had arrived at the plant about a week before we did.
We spent some time with him on our first days at the plant and believed he wanted to improve conditions for his people as much as we did. We felt he would support our efforts to make real positive change for the employees at the plant. We knew we needed his support to get critical work done.
Thousands of opportunities
Everywhere we looked, we saw things that could and should be improved. Early on, we reorganized a panel cutting area and made it easier and safer to get the materials needed to be cut. We also created some signage for the area, so finished parts could be easily found. We were also able to get much needed repairs for the equipment that was being used daily. We realized we couldn’t fix everything, even though we wanted to. We had to prioritize and decided to work on things we could immediately fix in order to give the employees hope for a better place to work.
Miles to go
One day I was watching the flow of material to different parts of the factory. I saw a large man take a pallet jack and transport cabinet parts from one area of the plant to another. He had to physically pull the material, which probably weighed 250 pounds, over a quarter of a mile. I followed him to his destination and then watched him pick up another pallet of parts, and manually pull it to another part of the plant. This looked really difficult to me, and I wanted to know more.
I introduced myself to him and he told me his name was Roy and that he had been doing this type of work for more than 5 years. I asked him if he knew how far he moved material in a day. He told me he was given a pedometer by the health and safety manager and found out he was pulling materials more than 17 miles in a day on average! Seeing how physically difficult this work was, I asked him, “What do you do when you go home at night?” His response was, “Adam, I sit down in my recliner, fall asleep, get up the next morning, and go back to work.” This was no way to live. I knew we had to help him.
I assembled my small team and we talked about what we could do to help Roy. In my mind, if we didn’t help him, he would soon be injured, and probably had been in the past. We did our research and found out there was a battery-operated pallet jack that would allow the operator to ride on when moving materials. We found a used one in the area that cost less than $5000. It was time to convince the plant manager to buy this unit immediately.
Sealing the deal
We asked the plant manager for an opportunity to review our findings and share our plan for further improvements. We had 12 improvement projects we wanted to implement before we left at the end of our 2-week assignment. We told him we thought there was nothing more important than buying the battery powered pallet jack for Roy. When we explained our reasoning, he realized how critical this would be for the health and well-being of one of his employees and also how much it mattered to us. He immediately gave us approval and called in his purchasing manager to help us buy it.
In 3 days, we had our new battery powered pallet jack and gave it to Roy to test out. He did and was so happy, he gave rides to some of his co-workers. The next day, I followed up with Roy and he told me he had some of the best sleep he had in months. We made a real difference for one person, and that made all of our efforts a resounding success!